|
|
Post by solo2racr on May 1, 2008 10:16:12 GMT -5
|
|
|
|
Post by olddog58vette on May 1, 2008 11:07:21 GMT -5
Great photos!!
|
|
jeffz
Full Member
Posts: 215
|
Post by jeffz on May 1, 2008 12:22:07 GMT -5
I like your dual oil line/manifold set-up. Nice pics!
|
|
|
|
Post by narleyfab on May 2, 2008 12:18:24 GMT -5
Nice job.
Can you tell me the wheelbase you ended up with?Does it have the stock rake?
Shawn
|
|
|
|
Post by solo2racr on May 2, 2008 12:39:05 GMT -5
Nice job. Can you tell me the wheelbase you ended up with?Does it have the stock rake? Shawn Wheelbase is 56.5" (1435mm) and the rake is 25 degrees. That's with a 140/80-17 rear tire (BT45) and will probably go about 26 degrees or so when I fit a 130/70-17 |
|
|
|
Post by pablosrfivehundred on May 2, 2008 22:11:52 GMT -5
can you make more of those brake adapters?
i'd like to do that to my XS650 project.
|
|
|
|
Post by solo2racr on May 3, 2008 10:32:58 GMT -5
I should be able to. I'm not sure right off how much aluminum I have around to do it and may have to get some more. I have made some up for an other guy in my Yahoo group a couple years ago. I'll check on what I have later and see how long it would take me to do it.
I'll get back to you here
|
|
|
|
Post by pablosrfivehundred on May 8, 2008 18:06:26 GMT -5
any luck?
|
|
|
|
Post by solo2racr on May 8, 2008 19:01:04 GMT -5
I hadn't found any till I saw your last post and looked again. I have enough for maybe 2 caliper adapters/disc spacers. One set for sure.
|
|
|
|
Post by pablosrfivehundred on May 8, 2008 19:45:05 GMT -5
so left and right spacers and left and right caliper mounts?
how much?
|
|
|
|
Post by solo2racr on May 8, 2008 21:01:34 GMT -5
Let me check to be sure I can do the spacers. I used a friends lathe to cut the ones in the photos and I'm not sure if I can get the jaws on mine big enough. I think I have a trick to do it on mine. I'll try it tomorrow.
|
|
|
|
Post by pablosrfivehundred on May 8, 2008 21:05:44 GMT -5
thanks
|
|
|
|
Post by solo2racr on May 23, 2008 16:14:12 GMT -5
I am going to get some more aluminum this week so I should have everything I need to make them. Sorry I haven't gotten back before now. I've been trying to get the final touches done on my SR so I can get it on the road. I finally got to that point!!! I took it out for the first ride today. Here are some photos of it done.   |
|
|
|
Post by canucksr on May 23, 2008 16:31:19 GMT -5
Absolutely gorgeous...looks really light and "flickable" in the twisties...Beautiful
|
|
|
|
Post by StewRoss on May 23, 2008 16:32:25 GMT -5
Very nice mate! Tidy...one day I'll get around to mine as well...too many projects. SR  |
|
