|
|
Post by StewRoss on May 16, 2007 15:50:07 GMT -5
Hi, Here's my Aussie Staintune Conti replica 'muffler'...not that quiet...heh, heh...sounds great.  Thanks to Steve Keough for the pic... SR ;D |
|
|
|
Post by StewRoss on May 16, 2007 15:51:08 GMT -5
Hmmm...I'll put it on the pics page...darn... SR  |
|
|
|
Post by StewRoss on May 16, 2007 15:57:14 GMT -5
|
|
|
|
Post by StewRoss on May 16, 2007 16:05:04 GMT -5
Here's the link to Staintune...I had to modify the mount bracket on the pipe to make it fit, and make another bracket from the normal ubber mount extending forward...and...it's fairly loud www.staintune.com.au/SR  |
|
|
|
Post by colinjay on May 16, 2007 17:44:43 GMT -5
Hi all,
I agree with Stew, Staintune conti replicas sound very nice on the SR. I have one meant for a Ducati 900SS on my cafe racer, and one for a 600 on my daily ride (stock) SR. The smaller conti replica was picked up at a swap meeting for $45 Aus and only required a slight kink in the haeder pipe to fit it to the bike.
I also have a brand new Yoshimura alloy can (ment for a Honda CBR900) that I got at a swap meeting for $90 AUS that will be going on to my Supermotad.
If you go to swap meetings you can quite often pickup very good mufflers that can be fitted to the SR for very little money.
CJ
|
|
|
|
Post by marlon on May 16, 2007 20:16:19 GMT -5
...it's fairly loud SR Yes. Yes it is. |
|
|
|
Post by StewRoss on May 16, 2007 22:41:42 GMT -5
Heh...heh...  |
|
|
|
Post by chrisbikes on Jun 15, 2007 10:18:45 GMT -5
Hi all!
Andy put me onto biebo (the company name is kickstarter-classics@web.de) - excellent to work with and I found most of his prices pretty reasonable.
There's also that "VD" site; looks great but appears pricey?
Chris
|
|
digiroc
Junior Member
1978 SR500E
Posts: 85
|
Post by digiroc on Jun 21, 2007 11:25:54 GMT -5
I got this pipe on a parts bike I bought for it's stator. The stator works great and the pipe sounds super, without being too loud at at low to moderate throttle. I also added a K&N filter to the stock airbox and upgraded to exhaust side top oiling, also from the parts bike. The bike now has more power and smoother delivery throughout the RPM band. I have to watch over-reving in the lower gears now, as the engine pulls strong right through 7000. I'm rebuilding the parts bike's stock SR carb (34 Mikuni) with the "Minton mods" and will jet it on the dyno for this pipe, but for now it runs great and I'm having a blast riding again!  |
|
rei97
New Member
Posts: 16
|
Post by rei97 on Nov 4, 2007 3:35:10 GMT -5
Also:
whenever you are looking for perfect stainless Muffler remakes (300€) or something special contact :
Motorrad – Ersatzteil – Service, Edelstahlauspuffe, Diesel - MZ
Wulf Peppmöller
Boisheimerstr. 15
41366 Schwalmtal – Dilkrath
Tel/Fax 0049-2163/1653
wulf_peppmoeller ät yahoo.de (@= ät)
Regards
Rei97
|
|
