Adam
New Member
Posts: 9
|
Post by Adam on Jun 28, 2007 9:05:16 GMT -5
The clutch on my SR is VERY heavy, I have changed the cable and springs but it remains heavy any ideas ?
|
|
|
|
Post by miker on Jun 28, 2007 9:40:03 GMT -5
Is the cable routed correctly, so it doesn't bind on anything while riding?
Did you lube the cable when you installed it?
One of the things I like best about mine is the light clutch.
miker
|
|
Adam
New Member
Posts: 9
|
Post by Adam on Jun 28, 2007 9:51:40 GMT -5
It was well lubed and at the moment is hanging from the bars to the clutch away from its proper place but its still like working out at the gym !! In the Haynes manual it mentions that some models had an extra clutch plate,would this make any difference,mine has 8 plates.
|
|
|
|
Post by christoph on Jul 16, 2007 16:34:42 GMT -5
Is it possible that the last owner put in stronger springs? mine has alternating stock and aftermarket springs and is quite heafty...it does allow me to lift the front wheel of the ground after a red light. ;D
|
|
