|
|
Post by aero on Mar 31, 2007 22:19:51 GMT -5
I've heard it said that later SR400 rocker arms have better oiling and fit straight into the classic 500 mill. Is this correct? If so what P/N's do you need?
Marcus
|
|
lurch
Full Member
Posts: 217
|
Post by lurch on Apr 2, 2007 6:05:50 GMT -5
Hi Marcus The P/N's for the SR400 2001-2 rocker arms are 3HT-12151-00 The rocker shafts/spinles look a little different ,haveing a hole machined through them & a small bolt securing them to the rocker cover Ive posted a picture Hope this helps LURCH  |
|
|
|
Post by aero on Apr 2, 2007 7:08:27 GMT -5
Thanks for that. Have you actually fitted these to a classic engine?
|
|
lurch
Full Member
Posts: 217
|
Post by lurch on Apr 2, 2007 7:37:44 GMT -5
Hi Marcus
Sorry mate I haven't . I'm in the process of rebuilding my 79 400 motor ,turning it into a 500 ,just a crank swap
I have bought new rockers & spindles but there the older type didn't know about the better version at the time
I don't think they'll be a problem fitting the newer parts to the classic motor but you might have to use the older type spindles
Maybe someone else has better knowledge of the newer type 400
You could try asking either Dues or Vanem I think there importing
them into Australia ,a long way form Me ,here in the UK
If you need any more P/N's just ask ;D
Cheers
LURCH
|
|
|
|
Post by aero on Apr 3, 2007 3:37:09 GMT -5
Couldn't find those names? any advances?  |
|
lurch
Full Member
Posts: 217
|
Post by lurch on Apr 3, 2007 4:32:30 GMT -5
|
|
