|
|
Post by johnuk on Jul 28, 2023 11:16:41 GMT -5
Hi, I have an ongoing problem with my gear change lever it keeps loosing during a ride.
Splines are ok on the lever and the shaft, Inspected the gear change lever and it's fine, I have also changed the pinch bolt. There is still a gap after it is fully tightened so I haven't run out of adjustment. It's been going on for a while and I cant cure it so far. Has anybody else had a problem like this? Cheers John.....
|
|
|
|
Post by redgalvin on Jul 31, 2023 8:11:11 GMT -5
How much torque are you putting on the screw?
|
|
|
|
Post by johnuk on Jul 31, 2023 9:03:46 GMT -5
Hi, I'm just doing it up tight as I can without stripping threads. I've just ordered a brand new one from a firm called "yambits" only 12 pounds which is about 15 and a half dollars. It's got to be worth a try I'll post back in a few weeks (got to recieve it and give it a few miles) if it works and also if it dont Thanks John
|
|
|
|
Post by redgalvin on Aug 4, 2023 17:05:22 GMT -5
Hi, I'm just doing it up tight as I can without stripping threads. I've just ordered a brand new one from a firm called "yambits" only 12 pounds which is about 15 and a half dollars. It's got to be worth a try I'll post back in a few weeks (got to recieve it and give it a few miles) if it works and also if it dont Thanks John
What part did you buy? |
|
|
|
Post by stevep on Aug 6, 2023 9:26:52 GMT -5
Yambits parts are generally of good quality. With luck they will get you in business again and shifting those gears without issue.
|
|
