|
Post by stingraypete on Nov 28, 2017 18:28:27 GMT -5
1977 Xt500 that had spent most of its life outside. only redeeming features were it had good compression and oil in the tank. frame rails under seat are rusted tru and will need to have new sections welded in. was missing quite a few parts most of which I acquired off Ebay. got it up and running after making a new single wire harness, original harness had been hacked and spliced and mouse-chewed beyond use. removed and cleaned flywheel magnets and stator plus new points and carb rebuild and it now starts/runs well. ongoing project.....
|
|