Post by toshytoshy on Jul 6, 2015 13:18:26 GMT -5
I am trying to get my jetting sorted out I think that I am running lean from 1/8-1/4 throttle. I also have some hanging idle.
Here's what I got
79 xt 500
90mm piston 9.5-1
1.75" exhaust with open muffler
34mm vm from a tt500
260 main
35 pilot
Needle second from bottom
Not sure what needle or needle jet as there are no visible markings.
Air screw 3/4-1 turn out
Can anybody post there jetting if they have a similar set up. Cheers
Here's what I got
79 xt 500
90mm piston 9.5-1
1.75" exhaust with open muffler
34mm vm from a tt500
260 main
35 pilot
Needle second from bottom
Not sure what needle or needle jet as there are no visible markings.
Air screw 3/4-1 turn out
Can anybody post there jetting if they have a similar set up. Cheers