blanking plate

pj
New Member

Posts: 9

blanking plate Oct 4, 2008 22:19:21 GMT -5

Quote

Post by pj on Oct 4, 2008 22:19:21 GMT -5

Hi to all.
I have a 95 sr 400 that made the trip back with me from Japan. have pulled the OEM air filter and added K and N air filter and crank case filter and super trapp pipe.
Was looking at deus site and saw a filter kit and they mention about an exhaust emission blanking plate that covers standard smog port. Would be great if anyone could explain this to me, wondering if I need to get one.
Don't know much about the workings of sr's but dig em.
Thanks again.

marlon
Senior Member

Posts: 630

blanking plate Oct 5, 2008 19:39:11 GMT -5

Quote

Post by marlon on Oct 5, 2008 19:39:11 GMT -5

To get the SR through emissions testing the rerouted some of the exhaust gas back through the air filter... or something like that.

You'll see a line that comes out from underneath the bottom of the front of the cylinder head. If you unscrew the two hex bolts that run into there, there's an open gap. The "Blanking plate" is just a peice of machined steel or alloy with two holes in it that bolts straight over the hole that's left.

The Internet - More crap at your fingertips.[br]Than on them.

tc Full Member Posts: 139	blanking plate Oct 5, 2008 21:47:39 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by tc on Oct 5, 2008 21:47:39 GMT -5 Me thiks that that might be a good place to mount a EGO sensor and run a mixture indicator os some kind ..TC

pj New Member Posts: 9	blanking plate Oct 7, 2008 1:58:26 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by pj on Oct 7, 2008 1:58:26 GMT -5 Thanks for your help Marlon. Found what you were talking about. Will look at plugging it up.

Post by pj on Oct 4, 2008 22:19:21 GMT -5

Post by marlon on Oct 5, 2008 19:39:11 GMT -5

Post by tc on Oct 5, 2008 21:47:39 GMT -5

Post by pj on Oct 7, 2008 1:58:26 GMT -5