sfsr
New Member
Posts: 6
|
Post by sfsr on Aug 15, 2008 13:00:42 GMT -5
Hey Guys. Just got my SR last weekend and one of the screws that holds the tach's gauge face on has vibrated out. Now, its just sitting inside the gauge and the face is having a seizure. This is the second screw on the bike to have vibrated itself out! So, is it possbile to open up the gauge and put the screw back in? thanks!
|
|
|
|
Post by StewRoss on Aug 15, 2008 17:03:35 GMT -5
Yes, there are places here that do this stuff and I'm sure there would also be over there as well...unless you're extremely careful doing it yourself it can look bad...you have to carefully 'unpick' the rim to get it off the front. It is rolled onto the front of the instrument and it's difficult to make it look right again. One other option (unless you only want the Yam instruments that is) is that there are a great number of aftermarket instruments available to suit different tastes for a low price. SR  |
|
|
|
Post by cycomoto on Aug 15, 2008 20:58:29 GMT -5
|
|
sfsr
New Member
Posts: 6
|
Post by sfsr on Aug 16, 2008 18:19:29 GMT -5
|
|
