|
|
Post by mick2cu on Jul 12, 2008 14:10:15 GMT -5
|
|
acmarina
Junior Member
Xubuntu Junkie
Posts: 58
|
Post by acmarina on Jul 12, 2008 14:25:54 GMT -5
Nice lookin' racer, Mick!
|
|
|
|
Post by StewRoss on Jul 12, 2008 17:11:36 GMT -5
Purposeful machine...too bad you can't get 18" slicks anymore... SR  |
|
|
|
Post by solo2racr on Jul 12, 2008 18:40:48 GMT -5
What seat is that for/from?
|
|
|
|
Post by mick2cu on Jul 13, 2008 4:36:11 GMT -5
It's an old TZ250 seat that I carefully cut down and re-worked. It fits perfectly on the (cut down at rear) frame rails, and there's a couple of brackets already on the sides of the frame that I attached it with. I welded a plate on the top of the frame, just behind the tank, and mounted the front of the seat with two more bolts. It's solid as a rock, and I also mounted the CDI unit under the plate.
|
|
|
|
Post by mick2cu on Jul 13, 2008 4:39:25 GMT -5
P.S. .. pro guitarist here, by the way. Bikes...Guitars...amps....and yes...women.... = life!
|
|
|
|
Post by solo2racr on Jul 15, 2008 13:02:08 GMT -5
Well......I have to say that my girlfriend doesn't look quite like that. My Paul is HoneyBurst and not a SunBurst and it's an Epi and not a Gibson. And my SR doesn't have number plates. One can always dream though   |
|
|
|
Post by thetank on Jul 21, 2008 14:42:48 GMT -5
Where did you get those wheels, Mick?
|
|
|
|
Post by mick2cu on Jul 22, 2008 3:16:05 GMT -5
I got a front hub off an RD 350, and the back hub was from an XT500. I had the D.I.D. rims made up at Kosman racing in the bay area. I don't know if they will still do that kind of work. You'll have to call them and see. - Mick
|
|
