|
|
Post by boylecomm on Jun 15, 2008 17:28:34 GMT -5
I'm not going to run a tach does anyone have a good, non leaking block off solution?
Thank you
|
|
|
|
Post by stevec5000 on Jun 15, 2008 18:08:53 GMT -5
Thumper Stuff has a TACHOMETER BLOCKING PLUG for $4 but you could probably make one on a lathe in a few minutes.
|
|
wmd
New Member
sr500 buell x1 gasgas ec250 kawasaki z200
Posts: 27
|
Post by wmd on Jun 16, 2008 3:22:53 GMT -5
this might be a dumb question but do they have rev limiter?
i would like to run no tacho as well but would hate to get all exited and blow it up
|
|
|
|
Post by StewRoss on Jun 16, 2008 4:45:42 GMT -5
No rev limiter on the older bikes...not sure about the late 400s though...you really don't need them...I have revved one of mine to 8,500 with no ill effect with standard valves and springs etc. A high performance one can get to near 10,000, but don't miss a gear. You need a tacho one one like this...  The tacho is not that necessary on a fairly standard bike...but I still like having one there. SR  |
|
|
|
Post by boylecomm on Jun 16, 2008 12:11:41 GMT -5
Perfect, thank you...
|
|
qqqq
New Member
Posts: 4
|
Post by qqqq on Aug 7, 2008 4:32:38 GMT -5
use a TT500 blanking plug , still available from dealer , is a multiple listing part -fits lots of different models
|
|
