ekker
New Member
Posts: 10
|
Post by ekker on Jun 10, 2008 18:52:14 GMT -5
Hi guys, first post for me. I was wondering if anyone has tried one of the "high performance disc brake rotors" from MikesXS, Part #30-3065. www.mikesxs.net/mikesxs-chassis.php?category_id=1.2I think the rotor should bolt right on, but I would like to hear from someone who has given it a try. Thanks, Eric |
|
|
|
Post by miker on Jun 11, 2008 10:49:51 GMT -5
My brother has one on his XS650. It required a disc spacer and caliper spacers (all included). I rode it and didn't find it significantly different than my stock XS650 front brake.
A little searching will turn up numerous people who have used other Yamaha brakes (R1, R6, FZR, etc) on the XS650 or SR500; just for another idea.
miker
|
|
ekker
New Member
Posts: 10
|
Post by ekker on Jun 11, 2008 13:59:36 GMT -5
Thanks for the input Miker.
Eric
|
|
|
|
Post by blacksmithjk on Jun 11, 2008 18:36:10 GMT -5
I put one on mine and may go for a second after I switch to a spoke front wheel I have sitting around from an XS 650.
It went on without a hitch and looks great. I am still breaking in the breaks so I have been going light on the front break till the pads wear in so I can't give you any comments on stopping power yet.
|
|
ekker
New Member
Posts: 10
|
Post by ekker on Jun 11, 2008 19:13:21 GMT -5
That is good to hear, I thought it would just bolt on but it's nice to have the confirmation.
Thanks,
Eric
|
|
