pcnsd
Full Member
Posts: 113
|
Post by pcnsd on Apr 30, 2008 21:26:13 GMT -5
These are pictures of my SR as purchased and then after the first pass at making it what I want. It is apart again as I address the lingering engine issues and work at weight reduction and braking improvement to name a few areas of concern. Hope this works. Before:  After:  |
|
|
|
Post by G Man on Apr 30, 2008 21:33:31 GMT -5
I beat you to the pic fix! ;D
Looks sweeet!
Question, did you remove the spoke wheels in favour of the mags?
G Man
|
|
pcnsd
Full Member
Posts: 113
|
Post by pcnsd on Apr 30, 2008 21:46:18 GMT -5
Question, did you remove the spoke wheels in favour of the mags?
G Man
It came with a polished XS650 front spoke wheel (4 lbs lighter than the mag) I have saved it for the 2nd pass. I am building up a Cheney Engineering dirt track hub for the rear wheel and plan to use the stock brake caliper with a front disk from a FZ600 (10.5") mounted to the FT hub. I also plan on changing to a 14mm master cylinder that I believe will provide better feel for the rear. PCnSD |
|
