|
|
Post by fastfred on Jan 15, 2008 14:07:53 GMT -5
I am in the mist of fixing what gravity as done to my front headlight assembly and speedometer.
Could anyone shed some light (a picture or two would do) on the assembly of the headlight specially the small bracket at the back. And the order in which the spacers goes in between the headlight and the turn signals.
Thanks a million.
Fred
|
|
|
|
Post by chew652 on Jan 15, 2008 17:22:15 GMT -5
www.yamahasportsplaza.com/pages/parts/viewbybrand/default.aspx This site sells parts cheap but also has diagrams so you can pick the exact part you need. You can also zoom in on the drawings for a better look. I use it all th time when I want to see how something goes together or if I have all the parts. I even buy a part once in a while. Cheers,Bill
|
|
|
|
Post by fastfred on Jan 16, 2008 13:05:16 GMT -5
Sort of, the drawing helps. But I am looking at part number 20, and trying to figure out how it connects to the rear lamp support (not shown on this drawing, but on the forks assembly). Both original part were damage and I can't tell if they are both bent. And if so, what angle should I bend them back to.
I am guessing is part of the support for the headlight to adjust the lamp assembly up-down.
So if anyone could take a picture of their headlight, specifically this bracket and how it is connected to the rear lamp support on the forks.
It would be great. Thanks
|
|
|
|
Post by fastfred on Jan 16, 2008 14:49:43 GMT -5
Ya, danks
Cheers
|
|
