GL Performance Network

Testing a Stator

« Prev
1
Next »

yamahapa New Member Posts: 2	Testing a Stator Jul 16, 2007 17:22:08 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by yamahapa on Jul 16, 2007 17:22:08 GMT -5 Hi, I just bought a SR500 and I have tested the rest of the system and seems to all work. What should be the correct OHM read for the stator and especially which wires? Thanks for the help Quentin

G Man
Administrator

Founding Member

Posts: 626

Testing a Stator Jul 16, 2007 19:36:03 GMT -5

Quote

Post by G Man on Jul 16, 2007 19:36:03 GMT -5

There are useful links to be found in the links section. One of the first links I posted was to Keith Porter's SR500 manual. While sometimes I think there is info not there, for the most part it is very useful. Here is a direct link to a page with some stator spec's.

www.slash5.net/sr500/b0000ddh.gif

Click on the pic once and it should blow up some and be easier to see.

Hope this helps.

G Man

Last Edit: Jul 16, 2007 19:37:33 GMT -5 by G Man

Previous SR500 Forum address www.sr500forum.com

Testing a Stator

Post by yamahapa on Jul 16, 2007 17:22:08 GMT -5

Post by G Man on Jul 16, 2007 19:36:03 GMT -5