wolle
New Member
Posts: 16
|
Post by wolle on Feb 24, 2007 14:06:53 GMT -5
I wonder if you folks know the right resistance on the charge coil on a 2j4 from 2979. My Haynes manual says : Red to Brown = 334 ohm, Brown to Black = 329 ohm.
I measured 5 ohm between red and brown, do i have a short ore is the manual wrong.
I have a lazy yellow spark. ignition coil seems to be OK.
What to suspect? CDI box (hope not)
|
|
|
|
Post by sjef on Feb 24, 2007 14:56:00 GMT -5
Hallo Wolle
i am afraid the manual is not wrong. i guess the coil needs a rewind.
regards sjef
|
|
wolle
New Member
Posts: 16
|
Post by wolle on Feb 25, 2007 4:31:00 GMT -5
Thanks sjef
Not a big problem. I have a buddy who rewinds generators, DC-motors etc.
Anyone tryed rewind a stator ?
Perhaps the wire is damaged on its way, from the CDI to the stator.
Flywheel puller. 27 MM LH thread, do anyone know the pitch.
Ole
|
|
wolle
New Member
Posts: 16
|
Post by wolle on Feb 25, 2007 4:41:20 GMT -5
Sorry sjef for asking about flywheel puller threatpitch again.
I saw your answer in the other tread, after i asked here.
Thanks, i will make one tomorrow.
Regards Ole
|
|
wolle
New Member
Posts: 16
|
Post by wolle on Feb 27, 2007 11:16:11 GMT -5
Hi folks found another manual www.slash5.net/sr500/b0000ddn.gifthe resistance between the red and brown lead is here given to be 5 ohm my Haynes manual says 334 ohm What to believe? Do anyone bother measure the resistance between the red and brown lead, on a OK stator? Thanks in advance |
|
|
|
Post by sjef on Feb 27, 2007 13:07:01 GMT -5
Hallo Wolle
checked the values both at a german and a dutch manual:red/brown should be 233-349 ohm
found a diagram stating it should be 5 ohm
will check it on a generator i have here
on a 78 generator red brown gives 5,1ohm, brown black 310 ohm, black red/white 15 ohm, black green/white 84 ohm
apparently you cannot always trust thes manuals
regards sjef
|
|
wolle
New Member
Posts: 16
|
Post by wolle on Feb 28, 2007 11:20:03 GMT -5
Thanks sjef
|
|
