|
|
Post by hopwheels on Feb 11, 2007 18:00:12 GMT -5
Hey guys:
If you don't install the "run/off" switch, is it necessary to close that circuit somehow in the wiring?
|
|
|
|
Post by wotavidone on Feb 11, 2007 19:55:59 GMT -5
I think the kill switch works by earthing the ignition to ground. I.e. the normal "run" position is open circuit, so you should be able to just leave the switch disconnected.
Mick
|
|
|
|
Post by hopwheels on Feb 11, 2007 20:27:44 GMT -5
Cool. Thanks Mick.
|
|
|
|
Post by miker on Feb 13, 2007 9:53:00 GMT -5
Not the same on all Yama's, BTW... the XS650 Specials need the switch bypassed (i.e. connect the two leads). Moral: Check yer schematic.
miker
|
|
