tc
Full Member
Posts: 139
|
Post by tc on Sept 13, 2007 23:28:23 GMT -5
:(Help guys I have broken the upper threaded rod on my accelerator pump and Yamaha can't supply has anybody got one to sell etc....Thanks TC
|
|
|
|
Post by milkman on Sept 14, 2007 7:52:19 GMT -5
I don't know what that is.......but I have a spare carb body and some other bits that might include one if you can enlighten me.
|
|
|
|
Post by andy on Sept 15, 2007 16:04:35 GMT -5
hi tc,not dure how your d.i.y skills are but you could make one without to much difficulty,dont get to bogged down with this gadget they dont make that much difference to performance anyway,if it aint connected,no big sweat.i have fitted a non-pumper replacement mikuni carb that is equally as good as the[very complex] stock carb.
regards,
andy
|
|
tc
Full Member
Posts: 139
|
Post by tc on Sept 15, 2007 20:14:01 GMT -5
Thanks guys
Andy I havent got access to any very small metric dies to cut the thread on the rod .
Milkman it is a small diameter bent rod that is on the left hand side of the carby ansd moves up and down when the throttle is opened and closed ..TC
|
|
|
|
Post by 1980thumper on Sept 16, 2007 11:46:38 GMT -5
correct, its here marked accelerator pump linkage:  Basically when you twist open the throttle quickly it squirts a wee bit of extra fuel through to cope with the demand  |
|
|
|
Post by caferacercarl on Dec 3, 2007 2:18:28 GMT -5
Stock carb is good,don't be frightened of it, or go Dellorto, [ or FCR if you can budget it] I have seen a pump rod made from coathanger wire, it worked!!!, regards Carl
|
|
