Exhaust fitting

nemesis
New Member

Posts: 23

Exhaust fitting Oct 1, 2007 2:29:58 GMT -5

Quote

Post by nemesis on Oct 1, 2007 2:29:58 GMT -5

I have go this exhaust that biebo is selling.
cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=290158333826&ssPageName=STRK:MEWA:IT&ih=019

Now have translated what he has written with regards to fitting as this

Nch removing the angle at the elbow union connection fits the exhaust also perfectly to the SR 500 (s.Foto

Does this mean cutting the existing downpipe at some point? I can see from the picture if the pipe is shortened then the bracket will line up on the bracket on the pipe. Perhaps the answer is obvious to some, but I just want to be sure before I cut!!!
Regards

sjef Senior Member keep on thumping Posts: 402	Exhaust fitting Oct 1, 2007 12:00:28 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by sjef on Oct 1, 2007 12:00:28 GMT -5 Hallo, there is a chromed steel bracket ,formed like a hook, on the exhaust. if you remove this, the exhaust will fit a sr downpipe(header) provided you use a adapter . also sold by biebo regards sjef

roadster
New Member

Posts: 25

Exhaust fitting Oct 5, 2007 1:04:02 GMT -5

Quote

Post by roadster on Oct 5, 2007 1:04:02 GMT -5

Hi Nemesis
If you check the thread a couple below (stock header to....) the pipe you have got is the the same I got from biebo on ebay. Yep, just cut off the bracket and it fits on well. Though as I discovered it is larger than the stock header so you'll have to do some adapting (unless you've already got a bigger aftermarket header that is!).
Very happy with mine - sounds great!

Post by nemesis on Oct 1, 2007 2:29:58 GMT -5

Post by sjef on Oct 1, 2007 12:00:28 GMT -5

Post by roadster on Oct 5, 2007 1:04:02 GMT -5