|
|
Post by robomod on Feb 7, 2007 19:54:30 GMT -5
|
|
|
|
Post by robomod on Feb 11, 2007 13:52:45 GMT -5
|
|
|
|
Post by robomod on Feb 12, 2007 14:46:33 GMT -5
|
|
|
|
Post by pablosrfivehundred on Feb 12, 2007 15:39:15 GMT -5
where are these round heads i keep seeing.
|
|
|
|
Post by robomod on Feb 12, 2007 17:04:30 GMT -5
I think it s a big bore kit available in Japan. Maybe Vanem can hook em up.
|
|
|
|
Post by robomod on Feb 14, 2007 17:30:03 GMT -5
|
|
|
|
Post by robomod on Feb 14, 2007 17:33:25 GMT -5
|
|
|
|
Post by marlon on Feb 20, 2007 10:59:59 GMT -5
Those choppers are bloody convincing. Maybe I'll go that way eventually with my 400...
Also, it looks like I've got the same book as you Stew! There's some shockers in there, but some stunning bikes as well.
|
|
|
|
Post by robomod on Feb 20, 2007 15:34:56 GMT -5
|
|
|
|
Post by G Man on Feb 20, 2007 16:04:46 GMT -5
Outstanding! I was really impressed by the seat mount with shock. Neat.
G Man
|
|
|
|
Post by G Man on Feb 20, 2007 16:06:52 GMT -5
Also Robo, I wonder what in the world these guys are using for a springer front end? Interesting.
G Man
|
|
|
|
Post by sjef on Feb 20, 2007 16:35:29 GMT -5
Hallo Gman, probably a old harleyspringer (replica ) Nitrohead used to have a springer in their salesprogram .Daytona had a girder. i do not know if they are for sale anymore. BTW it is rather easy to adept a harley springer to a yamahaneck.have done this on my chopper years ago. www.thumperpage.com/pix/1117/sr_500.jpgregards sjef |
|
|
|
Post by robomod on Feb 20, 2007 20:48:10 GMT -5
Hey Sjef- Do you have a how-to for that springer mod?
Gman- There are a few companies that sell HD type springer for metric fitment. I think they are all just modified re-pops.
|
|
|
|
Post by sjef on Feb 21, 2007 11:36:46 GMT -5
Hallo Robomod
the springerfork must have a 1 inch stem.
for the lower bearing make a bushing with a small collar:
inside 1,00 inch,outside30,00mm. push this bushing with the collar down over the the stem and second, place the lower bearing on to the bushing.for the upper bearing : grind the upper bearing from 25mm inside to 1,00 inch inside and place the bearing the normal way,
thats all
regards sjef
|
|
|
|
Post by robomod on Mar 4, 2007 6:31:24 GMT -5
Thanks sjef, sounds simple enough.  |
|
